SK Series

SK Series

Electric Submersible Pumps with Shredder Action Impellers for Municipal, Industrial and Agricultural Waste-Water

The Shredder (SK) pumps leave solids slightly larger than if passed through a grinder pump. The shredding action is caused by using a cutting impeller with a Tungsten Carbide Tip, against a “spiral” shaped diffuser plate.
NEW PRODUCT: Explosion Proof Shredder Pump! Need explosion proof pumps for use in Class 1, Division 1, Groups C & D Hazardous Locations: CLICK HERE!
ALSO AVAILABLE IN 316 CAST STAINLESS STEEL (SKX-Series)
  • Longer Power Cord – Standard 33ft. power.
  • 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
  • Three Seal Motor Protection – Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
    (Specifications dependent on model & may change without notice)
    For product brochure, operational manual or dimensions please go to Product Information & Literature

 

Model Motor
Rating HP
Voltage Rated Amps Discharge Connection Max
Solids
Max Head Max GPM Phase
SK1500C-230 2 230 14 3″ NPT-M 2.5″ 40.8′ 220 1
SK08C-208T 1 208 3.5 2″ NPT-M 2″ 48′ 95 3
SK08C-230T 1 230 3.2 2″ NPT-M 2″ 48′ 95 3
SK08C-460T 1 460 1.6 2″ NPT-M 2″ 48′ 95 3
SK08C-575T 1 575 1.3 2″ NPT-M 2″ 48′ 95 3
SK15C-208T 2 208 6.3 3″ NPT-M 2.5″ 42′ 220 3
SK15C-230T 2 230 6 3″ NPT-M 2.5″ 42′ 220 3
SK15C-460T 2 460 3 3″ NPT-M 2.5″ 42′ 220 3
SK15C-575T 2 575 2.3 3″ NPT-M 2.5″ 42′ 220 3
SK22C-208T 3 208 9.45 3″ NPT-M 2.5″ 45′ 270 3
SK22C-230T 3 230 9 3″ NPT-M 2.5″ 45′ 270 3
SK22C-460T 3 460 4.5 3″ NPT-M 2.5″ 45′ 270 3
SK22C-575T 3 575 3.2 3″ NPT-M 2.5″ 45′ 270 3
SK37C-208T 5 208 14.7 3″ flange w/ 4″ NPT-F discharge (3″ NPT-M optional) 3″ 62′ 360 3
SK37C-230T 5 230 14 3″ flange w/ 4″ NPT-F discharge (3″ NPT-M optional) 3″ 62′ 360 3
SK37C-460T 5 460 7 3″ flange w/ 4″ NPT-F discharge (3″ NPT-M optional) 3″ 62′ 360 3
SK37C-575T 5 575 5.5 3″ flange w/ 4″ NPT-F discharge (3″ NPT-M optional) 3″ 62′ 360 3
SK55C-230T 7.5 230 21 4″ NPT-F 3.5″ 54′ 570 3
SK55C-460T 7.5 460 10.5 4″ NPT-F 3.5″ 54′ 570 3
SK55C-575T 7.5 575 7.8 4″ NPT-F 3.5″ 54′ 570 3
SK75C-460T 10 460 15 4″ NPT-F 3.5″ 64′ 700 3
SK75C-575T 10 575 10.5 4″ NPT-F 3.5″ 64′ 700 3
SK110C-460T 15 460 19.8 6″ FLANGE, ANSI 3.5″ 94′ 845 3
SK110C-575T 15 575 13.7 6″ FLANGE, ANSI 3.5″ 94′ 845 3
SK150C-460T 20 460 25.7 6″ FLANGE, ANSI 3.5″ 101′ 911 3
SK150C-575T 20 575 19.8 6″ FLANGE, ANSI 3.5″ 101′ 911 3